Finally, special rivets for plastic riveting are available. However, if that side of the joining is inaccessible, glue on washers in advance. One solution is to use washers on the side of the fastened material that has the deformed rivet. During operation, the rivet gun will likely pull the rivet body through the plastic before the mandrel breaks off. The metal riveting process does not work with plastic because plastic is too soft to hold typical rivets. Second, to avoid splitting, use a high-speed carbide drill to pre-drill the holes the rivets will go through. First, riveting does not work with soft woods like cedar and pine: the rivets will split the wood. There are two important differences to understand, though. The riveting process with wood is similar in many ways to the metal process.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |